News Center
Contact Us
Sales Department 1: Manager Sun
+8618118373423
Grace@guomaoreducer.net
Sales Department 2: Manager Cai
+8615961294115
Sandy@guomaoreducer.net
Tel：0519-89196002
Fax：0519-86580909
Address：Longqian Road, Wujin District, Changzhou City, Jiangsu Province
News
Your position：Guomao Jiangtao Reducer > News >The assembly process of reducer is described briefly
The main work of component assembly includes parts cleaning, shaping and supplementary processing, parts preassembly, assembly, final assembly, adjustment and so on. 1. Parts cleaning, shaping and supplementary processing 1) parts cleaning:What should be checked for abnormal operation and leakage of
When there is a big noise or vibration in the operation of the reducer, it is recommended to check: 1. Bearing clearance and retainer 2, gear wear and mesh state 3. Wear of bearing seat holes 4. Alignment of input and output axes When the rDamage form and repair method of gear of reduction gear
Most gear drives transmit power as well as motion. In the process of transmission, under the action of load, if there is a gear broken tooth surface damage and other phenomena, resulting in the loss of gear normal working ability, called geHow to install and disassemble the rolling bearing of reduce
The assembly system of reducer bearing refers to the connection between the bearing inner ring and the shaft neck, and the connection between the bearing outer ring and the bearing seat. Generally, the matching of the rolling reduction motoWhat should be done to start the reducer?
1. Start and test run of reducer The speed reducer is recommended to run in at the beginning of use. If possible, the load and speed should be increased to the zui size in 2-3 steps, about 10 hours. During the trial operation, check the per
+8618118373423
Grace@guomaoreducer.net +8615961294115Sandy@guomaoreducer.net 
All Rights Reserved © Changzhou Guomao Jiangtao Reducer Co., Ltd. ICP：苏ICP备19016950号 Technical support：RanRan